PayTrace - Gateway To Happy
Recommended Hardware
PayTrace's Supported and Compatible Hardware
EMV Card Reader
IDEM-241A and IDEM-251P
The IDEM-241A is the preferred hardware as it is pre-loaded with the AES encryption. However, the more common IDEM-251P may be re-configured by our authorized distributors so as to give you access to more inventory when ordering the Augusta card reader. It is important to always ensure you are ordering the PayTrace configuration by clicking on one of the links below.
Reseller Ordering Options
The ID Tech Augusta with the PayTrace configuration uses
AES encryption
HID Keyboard Emulation
To Order: click here.
CDE part number: Order the device on their direct PayTrace page. Available on TSYS and Fiserv processing platforms.
Barcodes
To Order: click here.
Barcodes Part number: ID Tech IDEM-241A-BCIPT
CDE Solutions
To Order: click here.
CDE Part number: IDEM-241-A
Please order the device on their direct PayTrace page to ensure the correct configuration.
PayTrace GO EMV Card Reader
IDTECH VP3300 EMV Bluetooth Card Reader
Only available on the TSYS Processing Platform
Reseller Ordering Options
CDE Solutions
To Order: click here.
Barcodes
To Order: click here.
TPG
VP3300 BT GEN 2
Please email TPG at tpg.us.sales@ingrammicro.com with the Part Number to order the device.
TPG Part number: IDT-KEYINJ-340
PayTrace Go Card Readers
Magtek Card Readers
MagTek iDynamo Lightning Connector: Apple iOS operating system version 4.3 or later Preferred Reader for Apple Products.
Part Number: 21087013- BCIPT
Configuration: SECURITY LEVEL 3
BUNDLESEEDID: ESXBEHPWSG
REVERSE DNS: com.magtek.idynamo
MASKING: 4-ASTERISKS-4
KSID.TYPE: MAGENSA PRODUCTION KEY (MPK)
KSID: 90118800
Sourcing PayTrace Go Card Readers
We understand that some resellers have had difficulty sourcing properly configured PayTrace GO card readers from their hardware vendors. Therefore, we’ve established a relationship with a hardware vendor that stocks and is willing to distribute properly configured card readers to resellers.
Reseller Ordering Options
Barcodes Inc
Barcodes Inc has created a special part number for iDynamo card readers configured to work with PayTrace
Magtek 21087013-BCIPT ‐ MagTek iDynamo Card Reader - Lightning Port
To Order: from Barcodes click here.
Sales Rep: Matthew Greenberg
Email: mgreenberg@barcodesinc.com
Address: 200 W. Monroe St., 10th Floor | Chicago, Illinois 60606
P: 800-351-9962 x6505 | D: 312-610-6505 | F: 312-212-1800
Website: www.barcodesinc.com
Non-EMV Card Readers
Magtek Card Readers
MagTek Dynamag USB Keyboard Emulation
Part Number: 21073062-BCIPT - Set at Security Level 2 or 3
White: Part Number 21040107
Black: Part Number 21040108
MagTek's Magensa decryption service must be enabled for level 3 security, and the KSID must be set to 90118800
MagTek Mini USB Keyboard Emulation
Compatible Card readers
PayTrace is compatible with most card reading solutions that can send swiped card data to the computer as though the data was entered through a keyboard device. This technology or format is generally referred to as Keyboard Emulation. However, PayTrace can only support configuration questions regarding the above-listed equipment numbers.
Reseller Ordering Options
Barcodes Inc
To Order: click here.
Receipt Printers
Reseller Ordering Options
Star Micronics TSP654II cloudPRNT
To Order: from barcodes, click here.
Star Micronics TSP654IIcloudPRNT
To Order: from barcodes, click here.
Sales Rep: Matthew Greenberg
Email: mgreenberg@barcodesinc.com
Address: 200 W. Monroe St., 10th Floor | Chicago, Illinois 60606
P: 800-351-9962 x6505 | D: 312-610-6505 | F: 312-212-1800
Website: http://www.barcodesinc.com
Need more help?
Our support team will be happy to assist you.
If you are unsure where to go, try the search bar on the top right of any page.
If you cannot find the documentation you are looking for, please let our support team know so we can continue to improve this documentation.
If you have questions - please contact support@paytrace.com