Recommended Hardware

PayTrace's Supported and Compatible Hardware

EMV CARD READER- RESELLER ORDERING OPTIONS

Important Note: The IDEM-241A is the preferred hardware as it is pre-loaded with the AES encryption. However, the more common IDEM-251P may be re-configured by our authorized distributors so as to give you access to more inventory when ordering the Augusta card reader. It is important to always ensure you are ordering the PayTrace configuration by clicking on one of the links below.

The ID Tech Augusta with the PayTrace configuration uses:

AES encryption
KID Keyboard Emulation
Currently only available on the TSYS Processing Platform

Barcodes:

https://www.barcodesinc.com/partners/paytrace/
Barcodes part number: ID Tech IDEM-241A-BCIPT

CDE Solutions:

https://paytrace.cdeposparts.com/
CDE part number: IDEM-241-A
Please order the device on their direct PayTrace page to ensure the correct configuration.

POS Portal:

https://buy.posportal.com/paytrace
POS Portal part number: 131525-PT
Please order the device on their direct PayTrace page to ensure the correct configuration.

PAYTRACE GO CARD READERS

Magtek Card Readers

MagTek iDynamo Lightning Connector—Apple iOS operating system version 4.3 or later Preferred Reader for Apple Products
Part Number 21087013- BCIPT
Configuration: SECURITY LEVEL 3
BUNDLESEEDID: ESXBEHPWSG
REVERSE DNS: com.magtek.idynamo
MASKING: 4-ASTERISKS-4
KSID.TYPE: MAGENSA PRODUCTION KEY (MPK)
KSID: 90118800

SOURCING PAYTRACE GO CARD READERS

We understand that some Resellers have had difficulty sourcing properly configured PayTrace GO card readers from their hardware vendors. Therefore, we’ve established a relationship with a hardware vendor that is stocking and willing to distribute properly configured card readers to Resellers:

Barcodes Inc

Sales Rep: Matthew Greenberg

mgreenberg@barcodesinc.com

p: 800-351-9962 x6505 | d: 312-610-6505 | f: 312-212-1800 | www.barcodesinc.com

200 W. Monroe St., 10th Floor | Chicago, Illinois 60606

Barcodes Inc has created a special part number for iDynamo card readers configured to work with PayTrace:

Magtek 21087013-BCIPT ‐ MagTek iDynamo Card Reader - Lightning Port

You can order from barcodes by going to the following page: https://www.barcodesinc.com/partners/paytrace/

NON EMV CARD READERS

Magtek Card Readers:
MagTek Dynamag USB Keyboard Emulation

Part Number 21073062-BCIPT - Set at Security Level 2 or 3
MagTek's Magensa decryption service must be enabled for level 3 security and the KSID must be set to 90118800
MagTek Mini USB Keyboard Emulation
White: Part Number 21040107
Black: Part Number 21040108

ID Tech Card Readers:

ID Tech MiniMag 2 USB Keyboard Emulation
Part Number IDMB-334133B

Compatible Card readers:
PayTrace is compatible with most card reading solutions that are able to send swiped card data to the computer as though the data was entered through a keyboard device. This technology or format is generally referred to as Keyboard Emulation. However, PayTrace is only able to support configuration questions regarding the above-listed equipment numbers.

SUPPORTED RECEIPT PRINTERS

Star Micronics TSP650llcloudPRNT

Star Micronics mC-Print3

Both Printers are available through:

Barcodes Inc Click the link below the printer of your choice